Send Message

LKAV3307 4W Police Long Distance 1U Shipborne IP MESH MIMO Radio

1
MOQ
USD, RMB
Price
LKAV3307 4W Police  Long Distance 1U Shipborne IP MESH MIMO Radio
Features Gallery Product Description Request A Quote
Features
Specifications
Frequency: 1.4GHz (350MHz-4GHz Customizable)
RF Bandwidth: 2/5/10/20/40MHz
Data Rate: Up To 82Mbps
Link Latency: 10ms
Encryption: AES256
Video Input: HDMI / LAN
Application: Police Application
Highlight:

Base Station Transceiver

,

Small Base Station

Basic Infomation
Place of Origin: Shenzhen China
Brand Name: OEM / LinkAV
Certification: CE
Model Number: MANET3307
Payment & Shipping Terms
Packaging Details: Brown Carton
Delivery Time: Negotiable
Payment Terms: T/T, PayPal, L/C, D/A, D/P, Western Union, MoneyGram
Supply Ability: 1000pcs/Month
Product Description

Police 1U Shipborne IP MESH Radio 4W 4G Micro-SIM GPS/BD PPT WiFi AES256 Encryption with HDMI Input

 

Introduction

The MANET3307 is a rugged 1U rack mount MESH relay integrates 4G, GPS/BD, PTT and WiFi. It supports HDMI and LAN input. It can be applied to multiple scenarios such as a fixed point relay or to be installed on a moving vehicle, a vessel or an unmanned ship, etc.

 

Features

■ 1U rack mount design

■ Supports 4G network

■ Supports LAN and HDMI inputs

■ Supports WiFi and GPS/BD

■ Supports voice intercom

■ High bandwidth up to 82Mbps

■ Full IP duplex transparent data transmission

■ Flexible networking and rapid deployment

■ Convenient operation and maintenance

 

Specification

Transmission Characteristics
Default Frequencies 1.4GHz (350MHz-4GHz customizable)
Channel Bandwidth 5M/10M/20MHz/40MHz
RF Channel 2T2R
Output Power 36dBm (2x2W)
WIFI 2.4G/5.8G WIFI (2x100mw)
Modulation Type

DSSS/CCK BPSK/QPSK OFDM

BPSK/QPSK/16-QAM/64-QAM

Data Rate Up to 82Mbps
Network Capability 9 hops and no less than 64 nodes
Encryption AES256
Interfaces
RF Interface N F x2, SMA F x3
LAN Interface RJ45 x2
PTT Interface LEMO 7-pin
Video Input HDMI x1
4G Micro SIM x1
Electrical Characteristics
Working Voltage DC 12V / AC 220V
Working Current ≤1.32A (@12V)
Power Consumption ≤21W
Physical Characteristics
Weight 3kg
Dimensions 483*250.5*45mm
Storage Temp. -45℃~85℃
Working Temp. -40℃~65℃
Working Humidity 5%RH-95%RH (Non-Condensing)

 

Dimensions

LKAV3307 4W Police  Long Distance 1U Shipborne IP MESH MIMO Radio 0

Front Panel

LKAV3307 4W Police  Long Distance 1U Shipborne IP MESH MIMO Radio 1

■ Power push button

■ MESH signal indicator

■ Micro SIM card slot

■ Mic input - LEMO 7-pin

■ LAN input

 

Rear Panel

LKAV3307 4W Police  Long Distance 1U Shipborne IP MESH MIMO Radio 2

■ MESH antenna interface 1 – N F

■ MESH antenna interface 2 – N F

■ GPS antenna interface

■ 4G antenna interface

■ HDMI input interface

■ WIFI antenna interface

■ LAN input

■ DC input – 12V

■ AC input – 220V

 

Application Scenario

LKAV3307 4W Police  Long Distance 1U Shipborne IP MESH MIMO Radio 3

 

Topology Diagram

■ Star Type
LKAV3307 4W Police  Long Distance 1U Shipborne IP MESH MIMO Radio 4

■ Mesh Type
LKAV3307 4W Police  Long Distance 1U Shipborne IP MESH MIMO Radio 5

■ Random Type

LKAV3307 4W Police  Long Distance 1U Shipborne IP MESH MIMO Radio 6

 

A MANET system is a group of mobile (or temporarily stationary) devices which need to provide the ability to stream voice, data, and video between arbitrary pairs of devices utilizing the others as relays to avoid the need for infrastructure.
There are many techniques which are employed in order to provide robust MANET capability, including the following:


Self-Forming / Self-Healing is a crucial characteristic of MANET systems. In a true mesh network, radios can join or leave the network at any time, and the network will continuously adapt its topology as nodes move in relation to one another. This implies a decentralized architecture in that there are no central “master” hub radios required to administer control of the network, and communications will continue to persist even when one or more nodes are lost.


Link Adaptation is the ability for each radio to optimally configure its transmission parameters (constellation, FEC coding, and MIMO techniques) to maximize the data rate and robustness of the links to each of the other radios it is communicating with. A particular radio may communicate with another close by radio using a data rate of over 50 Mbps, while using a rate of only 2 Mbps to provide a robust link to a radio much further away. These are packet burst rates, where using a 50Mbps burst is very useful even for a much lower rate data stream because it leaves free channel airtime for other nodes in the network to use. Having high potential data burst rates is important because the less airtime is consumed for the shorter links, the more airtime is left to use slower and much more robust modulation and coding on the distant links.


Adaptive Routing is a mechanism for determining which potential relay paths are used when a stream of data needs to be sent between a given pair of radios. It needs to support self-forming self-healing functionality by adapting dynamically to use all radios present as potential relays and be resilient to the loss of relaying radios. It must also work in conjunction with the link adaptation because determining the optimal route for a stream of data requires consideration of other data which is flowing through the network, as well as the dynamic capacity of each link within the network. This problem is complex and requires all radios to share information about the data traffic flowing through them and the link capacity from each to the other neighboring nodes. This sharing of information must be done in an intelligent manner so that it does not consume too much of the precious available network throughput.


Transparent IP Networking means that any number of standard computer, IP video camera or other devices may be connected to each of the mobile radios and communicate through the mesh network just as if all of the devices were in a single office with wired Ethernet. There are different ways this can be accomplished within the MANET. To enable the most flexibility and ease of use, the best choice is to have the entire MANET network appear as if it is a single Layer 2 networking switch. This means that without any reconfiguration of IP addresses or other settings, a group of IP based devices that work together on a simple Ethernet switch can be connected to MANET radios and resume operations with the new freedom of wireless mobility.


Multicast Traffic presents a set of unique challenges for MANET systems. The multicast support implemented in basic wired Layer 2 switches is to replicate multicast packets coming into one port on all of the other ports. For instance, if an IP video camera is connected to one port it would send its video using packets tagged as multicast. Then computers wired to any of the other ports of the switch can tap into the wireless video stream. This simplistic method turns out to not work very well in a wireless network acting as a Layer 2 switch because many devices within the network might not need to see a particular multicast, and blindly sending the multicast to all devices thus congests the limited throughput of the wireless network unnecessarily. More advanced MANET systems allow manual and/or automatic optimization, limiting the transmission of multicast to only those devices that need a particular multicast stream.


Multi-channel Networks is an advanced capability of some MANET systems which allows a network to utilize multiple RF channels or even multiple frequency bands within a network while still providing the plug and play functionality of a single Layer 2 switch. A simple example of the usefulness of this might be a scenario where soldiers have radios operating on one frequency while vehicles have radios not only operating on that frequency but also ones in a different band. This additional band might be with higher power or higher gain antennas to provide a high speed “backbone” layer between the vehicles. Any soldier’s radio device can communicate with any other soldier’s radio over the air, but the secondary layer on a different frequency can reduce congestion on the soldier frequency and increase to area covered by the network.
All of these MANET networking capabilities combine to provide robust high speed connectivity similar to what is offered by state of the art 3G/4G networking, but in mission critical operational scenarios where permanent wireless infrastructure is not available.

 

About LinkAV
Founded in 2005, LinkAV has been dedicating to design and manufacture mobile wireless video/data transmission systems including COFDM, IP MESH and 4G-LTE series, with a group of professional engineers to provide tailor-made service (OEM). LinkAV serves a diverse, high demanding customer base from police/ to ordinary citizens, from UAV to UGV/Robots, from oil field to forest, from overseas to mainland China.

LinkAV is a China leading manufacturer (OEM) of innovative wireless communications and information systems. Our advanced data link systems are ideal for critical communications in unmanned systems such as unmanned ground vehicles (UGVs), unmanned aerial vehicles (Drones, UAVs) and unmanned surface vehicles (USVs), and are designed with portability and reliability foremost in mind.

 

Our Advantages

■ Over 15 years experiences in wireless communication solutions.

■ High product quality, competitive price and low MOQ

■ Excellent pre-sale and after-sale technical team.

■ Quick response and fast delivery.

■ OEM supported

 

FAQ

Q1: Are you a manufacturer or a trading company?

We're professional manufacturer specializing in wireless transmission systems.

Q2: Why should I choose you?

You'll get competitive price, prime quality, satisfied service and long warranty.

Q3: What kind of product service can I have?

OEM & ODM service.

Q4: What kind of warranty do you offer?

We offer one-year-warranty and lifelong maintenance.

Q5: What're the payment terms?

We accept bank transfer, PayPal, or cash payment.

Q6: Packaging & Shipping?
Neutral brown carton & Ship via DHL, FedEx, UPS, TNT or by air/sea.

Q7: How long for delivery?
1-3 weeks for regular model and 3-5 weeks for customized model.

Q8: Can I order 1 sample for test?

Yes, we welcome sample order, mixed samples are acceptable.

Q9: Do you have any MOQ limit?

No limit, 1pc is acceptable.

Q10: Is it OK to print my logo on the product?

Yes, please inform us formally before production and confirm the design firstly

 

Youtube: https://www.youtube.com/channel/UCn0iKGgxQtkpi2qG4U0HsZg

Official Website: http://www.LinkAVtech.com

LinkedIn: https://www.linkedin.com/company/linkav-technology/

Facebook: https://www.facebook.com/LinkAVtech/

Recommended Products
Get in touch with us
Tel : 0086 15817349508
Fax : 86-755-83735058
Characters Remaining(20/3000)